Commercial roof repair · Santa Fe
Commercial roof repair in Santa Fe, TX.
Mammoth Services repairs commercial and industrial roofs in Santa Fe, Texas: metal shop and warehouse roofs, low-slope membranes, and built-up roofs on stores, offices, churches, and schools. Our in-house crews find the leak, make the repair match the roof’s original wind design, and keep the records TDI and your insurer may ask for.
GAF GoldEliteCommercial Contractor- 42Yearsof combined team experience
- In-house crewsSkilledroofing mechanics
TIPSContract 24060401
How a repair visit works
A Santa Fe roof repair, step by step.
A commercial roof repair in Santa Fe starts with finding where the water enters. Mammoth Services checks inside first, then traces the path on the roof: fasteners, laps, flashings, curbs, and drains.
On a metal roof, many leaks come from fasteners and laps rather than the panels themselves. On a low-slope roof, they usually start at flashings and penetrations. The crew seals active leaks first, then makes the permanent repair with compatible materials and photographs it.
Because Santa Fe roofs are designed to wind speeds set by the building’s risk category, a repair at the roof edge or corner should restore the same attachment, not a lighter one. Commercial roofing in Santa Fe explains those wind speeds.
Metal roofs
Repairs on metal shop and warehouse roofs.
Metal roofs are common on shops, warehouses, and light manufacturing buildings, and their repairs are specific.
Fasteners
Backed-out, stripped, or corroded fasteners and worn washers replaced with the correct size and type.
Laps and seams
End laps and side laps resealed where sealant has failed and wind-driven rain gets in.
Panels and trim
Damaged or corroded panels, ridge caps, and edge trim replaced in sections where the rest of the roof is sound.
Low-slope roofs
Repairs on membrane and built-up roofs.
Stores, offices, churches, and schools commonly have low-slope roofs, where water has to be moved off, not just shed.
- 01
Flashings and penetrations
Rooftop unit curbs, pipes, vents, and wall flashings rebuilt or resealed.
- 02
Seams and punctures
TPO and PVC seams re-welded, and punctures patched with compatible membrane.
- 03
Drainage
Drains, scuppers, and gutters cleared and repaired. During Harvey, a station near Santa Fe recorded 54.77 inches of rain, according to the National Hurricane Center.
- 04
Wet areas
Wet insulation found and replaced so it does not keep feeding leaks and damaging the deck.
Source: National Hurricane Center, Tropical Cyclone Report, Hurricane Harvey.
Records
Repairs TDI and your insurer can follow.
TDI says roof repairs in the designated catastrophe area, which includes Santa Fe, must be built and inspected to TDI’s specifications for TWIA eligibility.
Windstorm path checked first
Before work starts, Mammoth Services tells you whether the repair needs a TDI inspection. If it does, the WPI-1 notice has to be filed before the work begins.
City permit when required
Mammoth Services confirms with the Santa Fe Building Official whether your repair scope needs a permit, and submits it through the City portal when it does.
Documented in Roof Passport
Photos, scope, and any certificates go into Roof Passport, and Roof React RAMP can schedule follow-up inspections through Roof React.
Sources: TDI, Windstorm Inspection Program questions and Galveston County designated catastrophe area; City of Santa Fe, Building, Permitting and Codes.
Santa Fe permit office
Timing a repair around the City’s schedule.
The City of Santa Fe processes permits Monday through Thursday, 7:00 am to 4:30 pm, and every inspection is requested through its Citizen Portal.
Permit days
Applications go in as PDFs through the online portal or in person at City Hall, 12002 Highway 6, and permit fees are due before the permit is issued. When a repair needs a permit, Mammoth Services builds that timing into the repair plan.
Inspection requests
Inspection requests are due in the portal by 4:00 pm, Monday through Thursday, and inspections take place from 10:30 am to 4:30 pm unless it is an emergency or arranged with an inspector. Temporary protection keeps the roof dry while an inspection is pending.
Combined inspections
The City asks that cover inspections and final inspections for framing, electrical, mechanical, plumbing, and gas be requested at the same time, not one by one. When a roof repair is part of a larger renovation, the roofing work is scheduled to fit those combined inspections.
Source: City of Santa Fe, Building, Permitting and Codes.
Questions
Roof repair in Santa Fe: direct answers.
If your question is not here, call Mammoth Services at (832) 416-1566.
- 01
Does a commercial roof repair in Santa Fe need a City permit?
It depends on the scope. The City’s building FAQ lists what needs a permit but does not address roof repairs directly, so Mammoth Services asks the Santa Fe Building Official before work starts and applies through the City’s Citizen Portal when a permit is required. The City processes permits Monday through Thursday.
- 02
Does a Santa Fe roof repair need a TDI windstorm inspection?
For TWIA eligibility, yes. Santa Fe is in the Inland I zone of TDI’s Galveston County catastrophe area, and TDI’s windstorm program covers roof repairs as well as re-roofs: the work must be built and inspected to TDI specifications. Mammoth Services tells you before work starts whether your repair falls under it.
- 03
How does a repair keep a Santa Fe roof’s wind design?
By matching the original attachment. The City lists design wind speeds by risk category: 146 mph for homes and businesses, 156 mph for churches and schools, and 163 mph for hospitals. A repair at a roof edge or corner restores the same fastening pattern and edge metal, not a lighter one.
Next step
Roof leaking in Santa Fe?
Call (832) 416-1566 for an active leak, or request a repair visit and tell Mammoth Services what you are seeing.