Commercial and industrial roofing · Santa Fe
Commercial roofing contractor in Santa Fe, TX.
Mammoth Services replaces and installs commercial and industrial roofs in Santa Fe, Texas, for businesses, shops, light manufacturing, churches, and schools along Highway 6, FM 1764, and FM 646. Our in-house crews design each roof to the wind speed for the building’s risk category, the City’s adopted codes, and TDI windstorm certification.
GAF GoldEliteCommercial Contractor- 42Yearsof combined team experience
- In-house crewsSkilledroofing mechanics
TIPSContract 24060401
The short answer
What Mammoth Services does in Santa Fe.
Mammoth Services is a commercial and industrial roofing contractor based on East NASA Parkway in Houston. In Santa Fe, Mammoth Services replaces low-slope and metal roofs, roofs new commercial buildings, recovers roofs where the existing assembly allows it, and restores sound roofs with coatings.
What sets Santa Fe apart is how plainly the City states its wind design: the required wind speed rises with what the building is used for. A shop, a store, a church, and a clinic on the same road can each need a different roof attachment design.
For leaks and storm damage on an existing Santa Fe roof, see commercial roof repair in Santa Fe.
Wind design by risk category
What the building is decides the roof.
The City of Santa Fe’s building FAQ lists the wind speed a building has to withstand, based on risk categories I through IV.
137 mph
Utility buildings.
146 mph
Risk Category II, which the City lists as homes and businesses. For commercial owners, that covers most retail, office, shop, warehouse, and light manufacturing buildings.
156 to 163 mph
156 mph for churches and schools and 163 mph for hospitals, buildings that need to stay usable after a storm.
A higher design wind speed generally means stronger perimeter and corner attachment, heavier edge metal, and tighter fastening patterns. Mammoth Services confirms the risk category with the owner and design team, then specifies an attachment design that meets it and the manufacturer’s requirements.
Source: City of Santa Fe, Building and permitting frequently asked questions (rev. 5, 2023).
Santa Fe permitting
City code, TDI, and the drainage district.
Santa Fe’s Building Official reviews each permit package, uploaded as PDFs through the City’s online portal or brought to City Hall at 12002 Highway 6.
City codes and inspections
The City lists the 2018 International Building Code among its adopted codes. The City also asks that cover inspections and final inspections for the different trades be requested at the same time, not one at a time, which matters when roofing is part of a larger project.
- Permit package complete before upload
- Inspections requested through the portal
TDI windstorm, Inland I
TDI lists Santa Fe in the Inland I zone of Galveston County and requires the 2024 IBC for Certificate of Compliance applications from April 1, 2026. A Santa Fe roof is specified to meet the City’s code and TDI’s at the same time.
- WPI-1 notice before work begins
- Inspections planned so the WPI-8 follows the job
Drainage district and zoning
The City advises consulting Galveston County Drainage District No. 1 before requesting a building or development permit, and lists Highway Commercial, Transportation (the commercial area between Highway 6 and the railroad tracks), and Light Manufacturing districts. These steps matter most for new buildings and additions.
Sources: City of Santa Fe, Building, Permitting and Codes and Frequently asked questions; TDI, Galveston County designated catastrophe area and Adopted Building Codes.
Growth and rain
A small city with a big rain record.
Santa Fe covers 16.9 square miles, with 13,913 residents estimated for July 2025, up 9.4 percent since 2020. Its commercial buildings sit along a few main roads, with open land around them.
Harvey, 2017
The National Hurricane Center lists 54.77 inches of rain at a station 3 miles east-northeast of Santa Fe and 46.70 inches at a volunteer gauge just south of the city.
Beryl, 2024
The National Weather Service lists a 47 mph gust in Santa Fe on July 8, 2024, from a citizen weather station.
What it means
Drainage that can handle extreme rain, and roof edges designed for open exposure with little shelter from nearby buildings.
Sources: U.S. Census Bureau, QuickFacts, Santa Fe; National Hurricane Center, Tropical Cyclone Report, Hurricane Harvey (CoCoRaHS gauge for the second total); National Weather Service Houston/Galveston, Hurricane Beryl 2024 summary (CWOP station).
Credentials
Who does the work in Santa Fe.
Mammoth Services is a 2026 GAF GoldElite Commercial Contractor (GAF ID 1133335) and a TIPS awarded vendor for roofing, contract 24060401. Roofing in Santa Fe is done by Mammoth’s in-house crews, backed by 42 years of combined team experience.
2026 GAF GoldElite Commercial Contractor
GAF’s GoldElite commercial contractor designation, GAF ID 1133335.
TIPS awarded vendor
Mammoth Services, LLC is an awarded vendor through TIPS, The Interlocal Purchasing System, for roofing. Contract 24060401.
Mammoth is eligible to offer GAF’s Diamond Pledge NDL, System Pledge, and Integrated System Limited Warranty on qualified projects. GAF sets eligibility, terms, and coverage, so no specific coverage is promised until GAF requirements are met.
Questions
Commercial roofing in Santa Fe: direct answers.
If your question is not here, call Mammoth Services at (832) 416-1566.
- 01
What wind speed does a commercial roof in Santa Fe have to meet?
It depends on the building’s risk category. The City of Santa Fe lists 137 mph for utility buildings, 146 mph for homes and businesses, 156 mph for churches and schools, and 163 mph for hospitals. Mammoth Services confirms the category with the owner and design team before the roof is specified.
- 02
Is Santa Fe in the TDI windstorm area?
Yes. TDI includes all of Galveston County in its designated catastrophe area and lists Santa Fe in the Inland I zone. For TWIA eligibility, a re-roof is inspected and certified through TDI, starting with a WPI-1 notice before work begins.
- 03
Can a school district or city buy roofing through TIPS?
Yes, if the district, city, or other agency is a TIPS member. Purchases go through Mammoth Services, LLC’s awarded TIPS roofing contract, 24060401.
Next step
Planning a roof in Santa Fe?
Book a roof assessment. Mammoth Services will start with your building’s risk category, the City permit, and TDI. Prefer to talk first? Book a roof assessment call.